Best Recipe Costing Software for a Small US Restaurant (2026): From Supplier Invoice to Menu Price
A supplier price rise should reach your menu before the next delivery. Eight ways a small US restaurant can keep plate costs current, from free to $489 a location, with Super44 our pick for one restaurant at $19 a month.
Alex Riesenkampff
17 November 2026 · 13 min read · Markdown
For one small independent US restaurant, our pick is Super44: photograph or forward a supplier invoice and it recosts every dish that uses those ingredients, warns you when a price rise pushes a plate past your target and sets each plate's cost against its sales from your POS, for $19 a month. LineCheck is $20 and adds stock counts, but publishes no POS connection. MarketMan, xtraCHEF, MarginEdge and Restaurant365 cost your recipes from both your invoices and your sales, for $249 to $489 a month per location. The same $19 also sends you a morning sales brief, answers your Google reviews and drafts your staff schedule.
If you only need to price one new dish, a free calculator does it today. If you count stock every week, or run several locations with a bookkeeper coding every invoice, the inventory and back-office platforms further down are built for you.
Super44 publishes this comparison and is one of the eight options. Nobody pays to be listed. The list covers what a single US restaurant would shortlist, from a spreadsheet to a group platform, compared on what one location pays for plate costs that keep up with its invoices. Prices are in US dollars per location per month, with setup fees, commitments and sales tax shown where the vendor states them.
| A spreadsheet or a free calculator | You type them; Free Food Cost reads 3 invoices a week | Free Food Cost flags dishes over target | You type sales in; Square Recipes reads Square sales on Plus or Premium | $0; CostMyDish $6.99 for unlimited dishes | Pricing a dish; a short menu |
| Super44 | Invoice photo, forwarded email or connected Gmail | Yes: the dish over target, its new food cost and the weekly cost | Yes, any POS | $19 Core, plus any sales tax; free to start | One independent restaurant |
| LineCheck | Invoice photo or PDF, read in minutes, no limit | Yes: the item, the vendor and the move | Does not publish one | $20 per kitchen, month to month | Kitchens that count stock and order from counts |
| meez | Premium only: scan, photo, email or EDI, up to 48 hours | Does not publish | Enterprise plan only | $179 billed annually or $199 monthly, plus a setup fee | Chefs and kitchen teams |
| MarketMan | 50 AI invoice scans a month on Starter; vendor EDI | Yes, above a threshold you set | Yes: Square, Toast, Lightspeed, Clover | $249 Starter, 12-month commitment | Kitchens that count stock |
| xtraCHEF by Toast | Invoice automation through Toast | Configurable price alerts | Toast | $279 Pro; Essentials at $179 has no recipe costing | Toast restaurants and their bookkeepers |
| MarginEdge | Photos, email or EDI; unlimited, 24 to 48 hours | Email when an invoice price is unexpected | Yes, 50+ POS and other systems | $350 plus onboarding; $435 on Toast | Independents to multi-unit groups |
| Restaurant365 | Vendor invoices through its AP automation | Variance alerts on actual vs theoretical | Yes, POS Connect | $489 billed annually, $539 quarterly | Groups of two locations or more |
A spreadsheet or a free calculator
The cheapest way to cost a menu, and the right start for a new dish. A spreadsheet holds your ingredient prices and one tab per recipe, and does the division. A free calculator skips the setup: our free menu pricing calculator turns a plate cost and a target food cost percentage into a menu price and the dollars it leaves, with no signup.
Free Food Cost goes further for $0. It holds unlimited recipes, reads up to three invoices a week overnight and tells you when a dish goes over your target "the morning after the price moves, with what to charge." Past three invoices a week, its maker points you to its paid app, LineCheck, below. CostMyDish is free for three dishes and 20 ingredients, with prices you type in. If you already pay for Square for Restaurants Plus or Premium, Square's Recipes beta costs dishes inside your POS from costs you enter by hand or by CSV.
Who should not rely on it: a restaurant taking deliveries from a broadline distributor, a produce house and a meat purveyor every week. Every invoice nobody types in leaves last month's price in your recipes. Kenneth Goldberg, president of the consultancy Culinary Econometrics, tells operators in Nation's Restaurant News to "Assign responsibility for kitchen information management to a specific individual with the necessary time and resource allocations." A spreadsheet stays right as long as that person has the hour.
Cost: $0 for a spreadsheet, our calculator and Free Food Cost. CostMyDish's unlimited plan is $6.99 a month. The real cost is the time someone spends typing invoice prices each week.
Super44
Our pick for one restaurant, because it puts the invoice, the plate cost and your POS sales in one place. Snap the invoice at the back door, forward the email or connect Gmail. Super44 reads each line, updates the ingredient price and recosts every dish that uses it. Tell it what goes into a dish or send a photo of the recipe card; anything it has to estimate is labeled.
When a price rise pushes a plate past your target, Super44 tells you which dish, its new food cost and what the rise costs you a week at your recent orders. Say your meat purveyor's 10 lb case of 80/20 ground beef goes from $48.00 to $52.20, close to the 8.8% rise the USDA forecasts for wholesale beef this year. A cheeseburger with two 3 oz patties now costs $4.16 to make, up from $4.00. At $14 on the menu, it moves from 28.6% to 29.7% food cost, over your 29% target, and at 150 burgers a week that's about $24 a week. Reply, and Super44 shows last week's burger sales and what $14.50 does: 28.7%, back under target, leaving $10.34 a plate after ingredients against $10.00 before the rise.
Who should not pick it: a kitchen that wants weekly stock counts and actual-versus-theoretical food cost, which Super44 doesn't do. It isn't a POS: it works beside Toast, Square, Clover, Lightspeed or any other, and connects one that isn't on its list within a day.
Cost: free to start. Recipe costing and price alerts are on Core at $19 a month plus any sales tax, flat per restaurant. The same plan sends a morning brief with yesterday's sales from your POS, drafts Google review replies in your voice and makes Google and Instagram posts from your own photos. It also drafts the schedule for up to 20 staff, checked against federal, state and city minimum wage, overtime and break rules.
LineCheck
LineCheck is a kitchen operations app from Brobata, a small Texas software studio run by a working chef that also makes Free Food Cost. It covers recipe costing, invoices, inventory counts, ordering, prep lists, bar costing and a staff schedule with a time clock, for one price per kitchen.
What it does well: invoices are "read from a photo in minutes, no limit," and plates recost the day prices move. Its price alerts "name the item, the vendor and how much it moved." Inventory walks run on a phone in shelf order with pars, and orders build from your counts, one per vendor, emailed to each rep.
Who should not pick it: an owner who wants each plate's cost read against what sold. LineCheck's pages publish no POS connection.
Cost: $20 a month per kitchen, month to month, with no setup fees and no contract. Cancel and you keep Free Food Cost and your data.
meez
meez is recipe software built around the chef: recipe books, scaling and unit conversions, prep-step slideshows for training, and costing. Its Starter plan is for, in meez's words, "individual chefs who want to organize recipes and calculate food costs."
What it does well: the recipe itself. Starter includes unlimited recipes, an AI copy-and-paste recipe import, basic recipe costing and a recipe margin calculator. Premium adds invoice processing: scan, photograph or email an invoice, or connect EDI, and meez's help center says processing takes up to 48 hours before the new costs reach your account. Premium also includes one costing feed from another back-office system.
Who should not pick it: an owner who wants invoices to keep costs current without paying for Premium. Below Premium, your own supplier prices go in by hand or by import, and meez's pricing page lists no price alerts. POS integration sits on Enterprise, at custom pricing.
Cost: Starter is $19 a month billed annually or $24 monthly, and Pro is $89 or $119. Invoice-updated costs start on Premium at $179 a month billed annually ($2,148 a year) or $199 monthly. Invoice processing also carries a one-time setup fee per location that meez doesn't publish.
MarketMan
MarketMan is an inventory and purchasing system with recipe costing built in. Its Starter plan is labeled "For independent operators."
What it does well: Starter includes real-time recipe costing, actual-versus-theoretical reporting, waste tracking, 50 AI invoice scans a month and one direct vendor connection. MarketMan names Sysco, US Foods and Gordon Food Service among the distributors that connect directly, and it reads sales from Square, Toast, Lightspeed and Clover. A new invoice recalculates every linked recipe, and you get "instant alerts when a price change affects your menu profitability beyond a threshold you set."
Who should not pick it: a restaurant that doesn't count stock, which is the job MarketMan is built around, or an owner who wants to try before committing. Every plan starts with a demo booking, setup typically takes two to four weeks for a single location, and the subscription agreement sets "at least a twelve-month commitment period."
Cost: Starter is $249 a month, so the first year commits you to $2,988. Growth, with unlimited invoice scans and smart ordering, is $299. Enterprise starts at $449.
xtraCHEF by Toast
xtraCHEF is Toast's back-office tool for invoices and food cost, sold only in the US through the Toast Shop inside your Toast Web account. Its own site says its tools are "built explicitly for restaurant operators as well as accountants and bookkeepers that serve restaurant clients."
What it does well: invoice automation scans and digitizes your supplier invoices and syncs them with your accounting system. Both tiers track ingredient prices and report food cost, and xtraCHEF offers configurable price alerts. Pro adds recipe costing, which by default uses "the most recent purchase prices for your ingredients," plus inventory management and product mix from your Toast POS.
Who should not pick it: a restaurant on another POS, since xtraCHEF is added through a Toast account after a demo with a Toast sales rep. It isn't the cheap route to dish costs either, because recipe costing is Pro-only.
Cost: Essentials is $179 a month per location and has no recipe costing. Pro is $279 a month per location, or $3,348 a year. Toast doesn't publish a setup fee or contract term for either.
MarginEdge
MarginEdge is a restaurant back office: invoice processing, food cost, recipe costing, inventory, bill pay and a daily P&L. In its own words, "It's used by independent restaurants, multi-unit groups, franchises and restaurant accountants."
What it does well: invoices are unlimited. Send photos from the app, email them or connect EDI, and MarginEdge captures every line item "in 24-48 hours, even handwritten scribbles and notes." Plate costs update from those prices, sales come in from more than 50 POS and other systems, and it emails you "as soon as prices on invoices come in at unexpected costs." Billing is month to month, with no cancellation fee.
Who should not pick it: one restaurant that wants dish costs without buying a whole back office. On Toast, MarginEdge adds a pass-through API fee of 10% of the subscription, and Toast charges $50 a month for the Restaurant Management Suite that lets your sales flow in, so a Toast restaurant pays $435 a month.
Cost: $350 a month per location, or 10% off paid upfront for a year ($3,780, non-refundable if you cancel early). Prices exclude sales tax and onboarding fees. MarginEdge sells onboarding packages for one to four locations and doesn't print their price on its pricing page.
Restaurant365
Restaurant365 is accounting and operations software for restaurant groups: its own accounting with AP automation, inventory with recipe costing, scheduling and a POS connection in one system. Its operations page is written for groups: "Whether you have two locations or 200."
What it does well: recipes run on "live ingredient pricing," so vendor cost changes update recipe costs automatically. You see actual-versus-theoretical food cost by location every day, with variance alerts before the margin goes.
Who should not pick it: one independent restaurant whose bookkeeper already works in QuickBooks. The Professional tier brings R365's own accounting, and R365 offers to move your chart of accounts over from QuickBooks, so you'd be replacing your books to get recipe costing. Payroll, hiring and HR cost extra.
Cost: the pricing page publishes no plan prices and invites you to build a plan with sales. The operations page lists Professional at $489 per location per month billed annually ($5,868 a year), or $539 billed quarterly. That tier includes accounting, scheduling and inventory, and R365 says its inventory includes recipe costing.
What food cost percentage to aim for
For a full-service restaurant under $2 million in sales, the National Restaurant Association's 2024 median food and non-alcohol beverage cost was 33.7% of sales, against 31.0% for those above $2 million. Across all full-service restaurants it was 32.0%, and 32.4% for limited-service, from more than 900 operators. Use those as reference points. The NRA says its figures are "not intended to represent standards or goals for individual restaurants," and a taco counter, a steakhouse and a brunch spot will land in different places.
The margin underneath is thin. The same NRA data puts median pre-tax income at 1.1% of sales for full-service restaurants under $2 million, so the dollars each plate leaves matter more than the ratio. "Percentages measure performance, but they do not fully capture financial outcomes," Goldberg wrote in Nation's Restaurant News in September. The burger above stays under every median at 29.7%, yet the beef rise was still costing about $24 a week. Our menu pricing calculator shows the dollars beside the percentage, and our prime cost guide adds labor to the food number.
When a cost jumps, you have three moves. Milwaukee Magazine reported in March that Lulu Cafe & Bar switched purveyors to save on costs, and co-owner Cameryne Roberts said it passed some of the increase on with an 8% to 10% price rise the summer before. Mia LeTendre, owner of the vegan restaurant Strange Town, hoped to hold her prices by adding dishes that cost less to make. Start with your five best sellers, since they carry most of the dollars. Our supplier negotiation scripts cover the purveyor call, and our guide to raising menu prices covers the reprint.
Which one fits your restaurant
For one independent restaurant, choose Super44. For $19 a month it reads your invoices and your POS, keeps every plate cost current and tells you which dish needs a new price. LineCheck is $20 and publishes no POS connection, and MarketMan, xtraCHEF, MarginEdge and Restaurant365, which cost recipes from both, charge $249 to $489 a location. The same $19 also runs your morning brief, review replies, posts and staff schedule.
Choose differently in four cases. A brand-new dish or a short menu with a few deliveries a week: a spreadsheet or Free Food Cost costs nothing. A kitchen that counts stock weekly: LineCheck at $20 a month for counts and orders, or MarketMan at $249 with a year's commitment and MarginEdge at $350 month to month for deeper actual-versus-theoretical reporting. A chef whose first need is recipe books and training: meez. A Toast group whose accountant codes every invoice: xtraCHEF, or Restaurant365 once you pass two locations.
If your question is wider than food costs, our restaurant profit software comparison puts labor and sales beside them.
Frequently asked questions
What is the best recipe costing software for a small restaurant?
For one independent US restaurant, Super44 on Core at $19 a month plus any sales tax. It reads your supplier invoices, keeps each plate cost current, warns you when a price rise pushes a dish past your target and sets plate costs against your POS sales. LineCheck is $20 a month but publishes no POS connection, and MarketMan, xtraCHEF, MarginEdge and Restaurant365, which cost recipes from both invoices and POS sales, charge $249 to $489 a location. The same $19 also covers your morning sales brief, Google review replies, social posts and staff schedule.
What's the best free food cost calculator for restaurants?
For one dish, a free browser calculator does the job with no signup. For a whole menu, Free Food Cost is $0 with unlimited recipes and reads up to three invoices a week, and CostMyDish is free for three dishes and 20 ingredients. Once more invoices arrive than anyone has time to type in, Super44 reads them and checks each dish against your sales for $19 a month.
What is a good food cost percentage for a restaurant?
The National Restaurant Association's 2024 median for full-service restaurants was 32.0% of sales, food and non-alcohol beverages together: 33.7% for those under $2 million in sales and 31.0% above it. Limited-service restaurants ran 32.4%. The NRA says these are not goals for individual restaurants, so set a target for each dish and check the dollars each plate leaves as well as the percentage.
Can software update recipe costs from supplier invoices automatically?
Yes. Super44 reads invoice photos, forwarded emails and invoices in a connected Gmail account, then recosts every dish that uses the ingredient. LineCheck reads a photographed invoice in minutes, MarginEdge captures line items in 24 to 48 hours, meez Premium takes up to 48 hours, and MarketMan Starter reads 50 invoices a month. xtraCHEF needs its $279 Pro tier for recipe costing.
Isn't meez also $19 a month?
meez Starter is $19 a month billed annually, or $24 monthly, with basic recipe costing from prices you enter or import. Costs that update from your invoices need meez Premium at $179 a month billed annually or $199 monthly, plus a one-time setup fee per location, and its POS integration sits on the custom-priced Enterprise plan. Super44 reads your invoices and your POS on Core at $19 a month.
Do I need to count stock to cost my recipes?
No. Recipe costs from your invoices, set against POS sales, tell you what each dish should earn. A weekly stock count tells you what you really used, which is how you catch waste and heavy portions. LineCheck, MarketMan and Restaurant365 are built for that second job.
Sources
- National Restaurant Association, Restaurant operators kept food cost ratios in check in 2024 (10 September 2025) — Median food and non-alcohol beverage cost 32.4% of sales (limited service) and 32.0% (full service) in 2024, from the 2025 Restaurant Operations Data Abstract, more than 900 operators. The data is "not intended to represent standards or goals for individual restaurants". Checked 17 November 2026.
- National Restaurant Association, Higher volume restaurants reported lower food cost ratios in 2024 (16 October 2025) — Full-service operators with annual sales of $2 million or more: median food and non-alcohol beverage cost 31.0% of sales in 2024; below $2 million: 33.7%. Median income before taxes 4.3% and 1.1% of sales respectively. Checked 17 November 2026.
- USDA Economic Research Service, Food Price Outlook summary findings (updated 23 October 2026) — Wholesale beef prices forecast to rise 8.8% in 2026; food-away-from-home prices forecast to rise 3.5% (interval 3.4% to 3.7%); annual average against the previous year. Checked 17 November 2026.
- Kenneth Goldberg, Understanding the true impact of food cost on profitability, Nation's Restaurant News (14 September 2026) — Goldberg is president of Culinary Econometrics, a foodservice consulting and research firm. "Percentages measure performance, but they do not fully capture financial outcomes." "Assign responsibility for kitchen information management to a specific individual with the necessary time and resource allocations." Checked 17 November 2026.
- Ann Christenson, Milwaukee Restaurants Are Battling to Survive Rising Costs, Milwaukee Magazine (6 March 2026) — Lulu Cafe & Bar switched purveyors to save on costs; co-owner Cameryne Roberts says it passed on some increased costs with an 8%-10% hike the previous summer. Strange Town owner Mia LeTendre hopes to avoid raising menu prices by adding items that cost less to make. Checked 17 November 2026.
- Free Food Cost home page — "Hear when a dish goes over, the morning after the price moves, with what to charge." Android app; "iPhone app coming soon". "Brobata is a small team led by a working chef." Checked 17 November 2026.
- Free Food Cost pricing — "$0/ month, per kitchen", no paid tier; unlimited recipes; invoice scanning "up to 3 invoices a week are read overnight"; for more, LineCheck, "a separate app"; free calculators run "with no signup at all". Checked 17 November 2026.
- LineCheck home page and pricing — $20 a month per kitchen, month to month, no setup fees, no contracts; "Invoices read from a photo in minutes, no limit"; price alerts "name the item, the vendor and how much it moved"; "Margin by dish, food cost against your target"; inventory, orders built from counts, prep, bar, schedule and time clock; on cancelling, "your recipes and costing keep working on the free plan". No POS connection listed. A product of Brobata LLC, Texas (joinlinecheck.com and /support). Checked 17 November 2026.
- CostMyDish — Free plan up to 3 dishes and 20 ingredients; Hobbyist $6.99 a month or $59.99 a year in the US for unlimited dishes and price history; prices entered by you. Checked 17 November 2026.
- Square Support (US), Track ingredient costs with Square Recipes — "Square for Restaurants Plus or Premium subscribers only"; beta; ingredients added manually or by CSV import; "Keep your ingredient unit costs up to date when prices change". Checked 17 November 2026.
- meez pricing — USD per month: Starter $19 billed annually or $24 monthly ("Basic recipe costing", "Recipe margin calculator", "Export/import recipe & ingredient cost"); Pro $89 or $119; Premium $179 or $199 with "Invoice processing", "Ensure costs are updated daily from invoices", "Connect to other BackOffice Systems" and "Includes 1 costing feed"; "Sales data imports from POS" on Enterprise only (custom); one-time setup fee per location for invoice processing, amount not published. No price alert listed. Checked 17 November 2026.
- meez invoice processing — "Scan invoice, snap a photo, or use EDI". Help centre (intercom.help/getmeez, What is invoice processing?): "Invoice processing is available to customers on Premium or higher subscription plans"; invoices take "up to 48 hours" to be processed. Checked 17 November 2026.
- MarketMan pricing — Starter $249 monthly "For independent operators": real-time recipe costing, actual vs theoretical reporting, waste, 1 vendor EDI integration, 50 AI invoice scans a month. Growth $299 with unlimited scans and smart ordering; Enterprise from $449. "Price Tracking & Alerts" on all plans; each plan's button books a demo. FAQ: distributors "including Sysco, US Foods, Gordon Food Service" connect directly; POS integrations include Square, Toast, Lightspeed and Clover. Checked 17 November 2026.
- MarketMan recipe costing software — New invoices recalculate linked recipes; "instant alerts when a price change affects your menu profitability beyond a threshold you set." Checked 17 November 2026.
- MarketMan home page — Implementation "typically takes 2–4 weeks for single-location restaurants". Checked 17 November 2026.
- MarketMan SaaS subscription agreement — Subscriptions on "an automatic monthly (with at least a twelve-month commitment period) or annual renewal basis". Checked 17 November 2026.
- Toast support, xtraCHEF Request a Demo — Added through the Toast Shop in a Toast Web account via a demo. Essentials $179 a month per location (invoice automation, accounting sync, ingredient price tracker); Pro $279 a month per location adds recipe costing and inventory. Checked 17 November 2026.
- Toast support, xtraCHEF 101 and Recipe Costing — "By default, xtraCHEF calculates your recipe and prep recipe prime costs based on the most recent purchase prices for your ingredients." Toast POS integration adds product mix mapping. xtraCHEF 101: Essentials (formerly Lite) and Pro, both with "Food Cost Reporting" and "Ingredient Price Tracker"; "exclusively available in the US". Checked 17 November 2026.
- xtraCHEF by Toast — Features include "Configurable price alerts"; recipe costs "Fueled by pricing data updated with each new invoice"; "built explicitly for restaurant operators as well as accountants and bookkeepers that serve restaurant clients". Checked 17 November 2026.
- MarginEdge pricing — $350 per location a month, unlimited invoices; monthly billing or 10% off paid annually upfront, non-refundable on early cancellation; "Prices exclude sales tax and onboarding fees"; onboarding packages for 1-4 locations; Toast users pay a pass-through API fee of 10% of the subscription plus Toast's $50 a month Restaurant Management Suite. Checked 17 November 2026.
- MarginEdge, How it works — Invoices by app photo, email, upload or EDI; line items captured "in 24-48 hours, even handwritten scribbles and notes"; price alert emails "as soon as prices on invoices come in at unexpected costs"; "more than 50 POS and systems". Checked 17 November 2026.
- MarginEdge home page — "It's used by independent restaurants, multi-unit groups, franchises and restaurant accountants." Checked 17 November 2026.
- Restaurant365 operations — Professional $489 per location per month billed annually, or $539 billed quarterly; includes R365 Accounting with AP automation and R365 Store Operations with scheduling, inventory and POS Connect; inventory "includes recipe costing"; payroll, hiring and HR extra. "Whether you have two locations or 200". Checked 17 November 2026.
- Restaurant365 pricing — No plan prices published: "The right plan starts here. Let's build it together." Checked 17 November 2026.
- Restaurant365 inventory management — Recipes with "live ingredient pricing"; vendor cost changes update recipe costs; actual vs theoretical food cost by location every day; "Real-time variance alerts". Checked 17 November 2026.
- Restaurant365 vs QuickBooks — "Easily Switch From QuickBooks to Restaurant365": R365 converts and imports your chart of accounts, vendors and customers. Checked 17 November 2026.
- Super44 US pricing — Starter free; Core $19 a month and Plus $49 a month, plus any applicable sales tax. Checked 17 November 2026.
- Super44, Cut costs (US) — Invoices snapped or forwarded and checked line by line; each dish costed from your invoices, with anything estimated labeled. Checked 17 November 2026.